Making homemade hooka's is the easiest thing you can do and the best part is you should already have everything or mostly everything at home that you would need for making a hooka bong out of a pop bottle. We will tell you how to make a single toke pop bottle hooka bong from things you have lying around, but if you do not have everything you can substitute or just go out and buy what you need to complete the home hooka.
Gather these things for your hooka bong
- 2 lt plastic pop bottle - used for the main body of the hooka bong
- Some sort of hose about 1/2 inch or abouts
- Any kind of metal tube 1/2 - used for the hooka downspout
- a metal socket - used for making a homemade hooka bowl - Or small metal funnel
- Electrical tape
- Hot glue and glue gun
- Drill with drill bits - for making the percolator hooka downspout
Optional - Glass bottle, Please see Making glass bongs professional to find out how to get through the glass.
Making your hooka pop bottle bong
step 1 - Above the plastic sticker displaying the brand name of the pop bottle you will want to cut or melt a hole the same size as your hose. Your hose should be at lest 1 - 2 feet long to make the best hooka bong. Once you have the hole stick in the hose about two inches in and use your hot glue gun to seal the hooka hose hole.
Step 2 - You can use either a metal tube about 1/2 in size or you can use another hose to make your hooka downspout really either way works it just depends on what you have in your house. You need a length that will runb from the top of the pop bottle to the bottom. If you are using a metal tube for your hooka downspout now is the time to drill about 8 very tiny holes into the side of the metal tube to make the hooka percolator. If you are using a hose just use a big needle to make many tiny holes at the very bottom of it, into the side.
Step 3 - Now melt or cut the same size hole into the bottle cap and stick your tube or hose in about 1 inch and glue and screw on the cap to the bottle. You should now have a hooka hose made and your hooka percolated downspout running from the top to the bottom of the bottle.
Step 4 - Attach a large socket to the tube or hose that should be out 1 inch, Make sure to use a big socket and a socket that fits snug onto the downspout. Do not use glue to attach because it will heat up and the bowl will fall off. You can use electrical tape if you wish but only at the bottom of the socket bowl where the tube and socket meet otherwise you risk igniting the tape and inhaling its harmful toxic smoke along with your weed.
Step 5 - Don't forget to fill your pop bottle hooka bong with water about half way
You now have a percolated homemade hooka bong for single tokers. If you want more hose's such as 2 or more just make more holes in the pop bottle for extra hooka hoses that's it simple isn't it.
Related Articles
Smoking bongs with hot water
Adding ice water vs hot water in your bong
Making homemade bongs - professional Homemade bongs - Basic
How to clean your bong
Cleaning downspouts and pipes and bowls
No comments:
Post a Comment